105 Photos
Phoenix, AZ
1,039 小時
TRXEQ405COMP41512
Loading...
合格的利氏兄弟員工收集了詳細的設備資訊,並對此資產的主要組件執行了功能測試。您或代理人也可以在拍賣日投標前,於現場檢驗任何品項。
ID 號碼
#12465054
在拍賣場中
是
年份
2023
製造商
資產類型
序號或 VIN
TRXEQ405COMP41512
功能
Tier 4, 2023 US EPA Label, Cat C4.4 4.4 L Diesel Engine, Requires Diesel Exhaust Fluid, 6 ft x 13 ft Vibratory Grizzly Feeder 36 in x 24 in Jaw Crusher, 23.5 in Wide Fines Discharge Conveyor, 31.5 in Wide Under Crusher Conveyor, 30 in x 7 ft Cross Belt Magnet, Radio and Cable Remote Control, 16 in Triple Grouser Track Shoes
備註
Located Main Office Showcase, UNIT IS SELLING IN PHOENIX, AZ
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
TRXEQ405COMP41512
CE Mark
CE Marked
Hour Meter / Odometer
1039 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Gauges
Operational
Engine Controls
Crusher/Screen Controls
The crusher operates momentarily then shuts down due to a fault code issue.
Limited Function Check
The main components are in place and operational as noted.
Emission Certification Label
US EPA certification label
Block Heater
No
Blow by @ idle (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check (Engine)
The engine started and ran.
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Crusher Door Cylinders
Conveyor Cylinders
Power Travel Drive System
1 Travel Speed, Travels properly
Limited Function Check
The hydraulic system was operational.
Feed Hopper
Length @ top: 13, Width @ top: 6, Grizzly length: 6 ft 6 in, Width between grizzly bars: 2 in
Crusher Base Frame
Crusher Chamber Frame
Jaw, Blow Bar and Anvil Wear Surface
Jaw width and spacing between jaws Jaw width and spacing between jaws 24 in
Crusher Drive System
Discharge Conveyor Condition
Discharge Conveyor Drive Motor
Operational
Discharge Conveyor Rollers
Discharge Conveyor Head and Tail Pulley
Left Grouser Height
21 mm
Left Track Bushings
Bushings have not been turned
Right Grouser Height
22 mm
Right Track Bushings
Bushings have not been turned
Oil Sample Analysis
engine | |
---|---|
date of analysis | Dec 23, 2024 |
Silicon | 4.52 PPM |
Tin | 2.72 PPM |
Silver | 0 PPM |
Aluminum | 3.98 PPM |
Chromium | 0.79 PPM |
Lead | 0.33 PPM |
Copper | 91.84 PPM |
Nickel | 1.08 PPM |
Iron | 24.59 PPM |
Glycol | NEG |
Water | NEG |
Fuel | <5% |
詳細的設備資訊範圍有限,利氏兄弟拍賣行並未檢驗除此處明確規定以外的任何設備部分或組件。除非明確說明,否則我們對設備或其組件不做任何明示或暗示的陳述或保證,包括但不限於有關功能性、符合性或遵守任何適用當局或監管機構的任何安全標準或要求、適合任何特定用途或適銷性的陳述或保證。強烈建議您在投標前自行詳細檢驗設備。
設備並未在負載下進行測試,也未在所有可用檔位中操作。我們不聲明或保證設備依製造商的規格運作。除此處明確包含的功能之外,未對任何功能進行任何檢驗。僅提供個別底盤系統組件的精選相片,可能無法顯示整個底盤系統的狀況。
測量值僅供估計。實際負載尺寸可能會因卡車 / 拖車高度及負載機器配置 / 位置而異。買家有責任在離開我們的拍賣現場前測量所有負載,以確保負載運輸安全。所有測量值都應由買家驗證。請勿依賴這些測量值進行運輸。